If you have a dry system to calculate you might have gotten frustrated by AutoCalc setting up C=120 piping. A really quick way around this is to create new pipe types in HydraCALC/Utilities/Fittings that have the same properties as Sched-10 and Sched-40, but with a C-Factor of 100. That way you can set your schedule to these in AutoCalc and have them ready to go
recent posts
- October 2025
- May 2025
- November 2024
- October 2024
- September 2024
- July 2024
- April 2024
- February 2024
- January 2024
- August 2023
- July 2023
- March 2023
- October 2022
- August 2022
- July 2022
- June 2022
- May 2022
- March 2022
- February 2022
- January 2022
- October 2021
- September 2021
- February 2021
- January 2021
- May 2020
- March 2020
- February 2020
- January 2020
- December 2019
- September 2019
- July 2019
- May 2019
- April 2019
- February 2019
- January 2019
- December 2018
- October 2018
- September 2018
- June 2018
- April 2018
- February 2018
- January 2018
- December 2017
- October 2017
- September 2017
- August 2017
- July 2017
- May 2017
- December 2016
- October 2016
- September 2016
- August 2016
- March 2016
- February 2016
- January 2016
- December 2015
- October 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- February 2014
- January 2014
- December 2013
- November 2013
- September 2013
- July 2013
- June 2013
- April 2013
- February 2013
- January 2013
- December 2012
- November 2012
- October 2012
- September 2012
- June 2012
- May 2012
- April 2012
- March 2012
- December 2011
- November 2011
- October 2011
- September 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- September 2010
- August 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
- August 2009
- July 2009
- June 2009
- May 2009
- April 2009
- March 2009
- February 2009
- January 2009
- December 2008
- November 2008
- October 2008
- September 2008
- August 2008
- July 2008
- May 2008
- April 2008
- March 2008
- February 2008
- January 2008
- December 2007
- October 2007
- September 2007
- August 2007
- July 2007
- June 2007
- May 2007
- April 2007
- March 2007
- February 2007
- January 2007
- December 2006
- November 2006
- October 2006
- September 2006
- August 2006
about
Posted in HydraCAD
One response to “AutoCalcing with C=100 piping”
-
Art, what ever happened to fitting groups that we had in previous versions? We could save a group for pipe type and fittings say for CPVC design and one for steel pipe design and had the option in the calc program to select which group to apply to our pipe input.
LikeLike
The H-Factor 
Leave a reply to lando miliziano Cancel reply