After downloading a file, it is often Blocked. You must right-click on it, pick Properties and then check the Unblock item: But doing a dozen or more files gets old, real fast. I just learned a way to Unblock a batch of files at once. It involves using PowerShell, a Microsoft tool that is a…
If you want to use a new type of hanger, or are a fab shop that gets a job from a contractor that uses a hanger type that you do not have, it is easy to add that new hanger type to your own machine. A hanger is an assembly, and an assembly is just…
Recently our previous blog service (Typepad) ended their business – so, we have a new home. It will take a bit to get images back and displaying properly, but we are working on it! Final pageview count of original Typepad blog: 387,232
The updated Purge All Unused Layers and Blocks (PURG) in Rev 2 of V50.01 goes further, fixes more and is easier to use than our older command. The new command purges the drawing, runs an AUDIT and then purges it again. Try it.
A wooden roof with dormers – many of us see the all the time, but how to label it so that HydraCAD can elevate it properly – that is another thing. The drawing below shows how to handle this. If you download and install the HydraCAD V50.1 Rev2 update from our website, this drawing will…
From a Customer: I have a suggestion for your next revision: The info sheet button could have a pull down tab so that a different info sheet can be used. Quite often I will use the first calc, modify it and do a standpipe calc. The only problem is the info sheet can not be…
From a customer question: …for the Part Masks, I was hoping there was a quicker, easier way to bring them up and/or print out a matrix to use when I am (or others less experienced in Hydratec software are) looking for parts (or specific manufacturers) to bring into a model. The PN LookUp button has…
Lets say you have a ton of branch lines with retrofitted armovers that go off in all directions. There is no easy way to size these, right? Try this: Size all your branch lines by selecting the Lines option in the Size Pipe toolbar. Also select Use Directional Filter and select either Horizontal or Vertical,…
