If you want to use a new type of hanger, or are a fab shop that gets a job from a contractor that uses a hanger type that you do not have, it is easy to add that new hanger type to your own machine. A hanger is an assembly, and an assembly is just…
Recently our previous blog service (Typepad) ended their business – so, we have a new home. It will take a bit to get images back and displaying properly, but we are working on it! Final pageview count of original Typepad blog: 387,232
A customer called today asking how to enter a 1″ black plastic underground pipe for the calc. This particular situation sounded unique enough that I did not tell him to add that pipe type to our database, as I would have if he expected to see this pipe type used repeatedly. I told him to…
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | ||||
| 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 11 | 12 | 13 | 14 | 15 | 16 | 17 |
| 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| 25 | 26 | 27 | 28 | 29 | 30 | 31 |
To be able to use HydraCAD with a background drawing, you need to do these simple steps: Step 1 – Start a new drawing using one of the HydraCAD templates. Answer the scale question if asked. This is non-negotiable! Step 2 – Insert the background drawing into the new HydraCAD drawing, exploded. Meaning, checking the…
If the background drawing has existing piping, you may be able to use that piping for HydraCAD. The ‘may’ all hinges on how the original author drew the piping. Is it from center of head to center of head (or fitting)? Is it from edge of head to edge or head (or fitting). Is it…
Say you have a background drawing that has sprinkler heads already laid out, but they aren’t HydraCAD sprinkler heads. What to do? Zeroth – Do what you should always do with a background drawing. That is, start a New drawing using one of the HydraCAD templates, and then insert your drawing into it, exploded. First –…
The H-Factor 